Card slot connector JC-179

This is the splicing connector for the greenhouse card slot component, with the following core information:

Structure and Material: Made of galvanized metal, it has a long strip flat structure (with two mounting holes), which combines structural flatness and connection firmness.

Function and purpose: Used for the length splicing of greenhouse card slots (such as fixed film card slots). After aligning the ends of the two card slots, they are fixed with screws through the installation holes of the connecting pieces to achieve the extension splicing of the card slots.

Applicable scenarios: Suitable for extending the length of greenhouse film fixed film slots, splicing skeleton slot components, and other scenarios. It is a one-to-one connector for extending slot components.

Features: Made of galvanized material, rust resistant and weather resistant. The long strip flat plate is attached to the end of the card slot, and the double installation holes protect the splicing firmly. It is easy to install and operate.