Pacifier JC-236

Adaptation interface: First confirm the size of the greenhouse film interface (or pipe port) that needs to be connected, and the bottom sleeve of JC-235 needs to match the inner diameter of the interface.

Insert the sleeve: Insert one end of the bottom sleeve of the pacifier into one of the greenhouse membrane interfaces (or pipe end), and push hard until the sleeve is fully embedded.

Docking with another port: Align the other membrane interface (or pipe end) with the other side sleeve of the nipple, insert with equal force, and confirm that both ends are tightly fitted.

Check the sealing: After installation, gently pull both ends to confirm that the connection is firm and not loose; If used for greenhouse film splicing, it can be further fixed with card slots.